 |
Only the best accessories can complete the best winding machines: if it is a matter of calibrating the wire wight during winding, or the wire must be skeined at the hooking point to assure a better resistance, the MARSILLI catalog always proposes the ideal solution for the customer’s requirements. We can check with the technical.-commercial consultants of MARSILLI the availability in the extended catalog of further accessory units, such as skinning machines, taping machines etc.
MSK Skeiner
MT tensioners with brake
TEP Tensioner with motor
|
|
|
MSK Skeiner |
| |
|
 |
With winding machines of production lines of MARSILLI, the skeiner is perfectly integrated into one control system, without any interface problem. This means for you only one supplier: MARSILLI!
technical data
|
length of skein: |
|
min 90 max 660 mm |
|
diameter of workable wires: |
|
0.018-0.25 |
|
minimum noose: |
|
3
(holes,eyelets) |
|
skeining spindle speed: |
|
14.200 rpm |
|
shuttle speed: |
|
120.000 mm/m |
|
wire release with recovery arm lock: |
|
always |
possibilities
|
6-40
8-40
6-60
8-60
6-100
8-100 |
12-40
12-60
12-80
16-40
18-40
24-40 |
|
|
|
MT tensioners with brake |
| |
|
 |
The wire tensioners of the MT 2 - 3 series are ELECTRO-MECHANICAL units, able to tension the wire by means of an electronics managing an electro-magnetic brake, and a wire recovery lever, pneumatically operated. The tensioning parameters are stored with the winding program. To be used for a wide range of wire diameters, the MT wire tensioners allow:
- to tension the programmable wire: by means of the dedicated SW, the MT wire tightener offers the possibility of changing the wire tension during the working cycle
- to position the programmable lever: as for wire tensioning, we can program the working position of the lever, to obtain a wire recovery suitable for the different phases of the working cycle
- detection of wire breaking.
|
| |
technical data MT2
wire diameter range
wire tension range
max peripheral speed
resolution
skein recovery max. |
0.06 - 0.24 mm
33 - 380 g
18 m/s
1 g
300 mm |
technical data MT3
wire diameter range
wire tension range
max peripheral speed
resolution
skein recovery max. |
0.2 - 0.71 mm
272 - 2590 g
10 m/s
5 g
430 mm |
|
|
|
Tep tensioners with motor |
| |
|
 |
The TEP wire tightener is a programmable device to regulate the wire tension. It can be used for a wide range of wire dimensions. The main features are:
- tension of the programmable wire; using specific functions of the program, the TEP wire tightener offers the possibility of changing the wire tension during the working cycle.
- position of the programmable arm; as for the wire tension, we can program the working position f the arm, to obtain a wire recovery suitable for the different phases of the working cycle
- regulation in close loop of the programmed tension, with precision loading cell;
- detection of the wire breaking.
|
| |
technical data TEP1
wire diameter range
wire tension range
max peripheral speed
resolution
skein recovery max. |
0.03 - 0.1 mm
10 - 80 g
20 m/s
0.1 g
300 mm |
|
| |
|
